Showing all 8 results

One Step Teak Cleaner and Brightener

One Step Teak Cleaner & Brightener

Combines Two Steps in One

Description

Starbrite® Teak Cleaner and Brightener is specially formulated to transform old gray and black stained teak in one step.

Features

  • Saves time and effort preparing teak for oiling
  • Cleans teak; removing dirt, grime and old oil
  • Leaves teak ready for oiling
  • Ideal for use on all teak and fine woods
  • Contains no dangerous acids; Phosphate-free, Biodegradable formula

Instructions

For badly weathered, grey or black teak, apply Teak Cleaner & Brightener directly to dry wood. Use a stiff bristle cleaning brush or Starbrite Medium Scrub Pad to spread product evenly. Allow Teak Cleaner & Brightener to remain on surface for approximately two to three minutes before scrubbing. Scrub in the direction of wood grain to ensure deep cleaning before thoroughly rinsing wood with fresh water. Severely dirty or stained wood may require a second application and use of Starbrite Stainless Steel Teak Scrub pad. For lightly weathered teak, wet wood with fresh water, apply Teak Cleaner & Brightener, using a bristle brush or medium scrub pad to spread evenly over surface to be treated. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After cleaning wood, apply Starbrite Premium Golden Teak Oil to enhance natural wood color and preserve and protect the restored wood. Rinse off spills and drips onto surfaces not being treated. Avoid contact with fabrics.

Premium Golden Teak Oil - Step 3

Premium Teak Oil Preservative / Sealer – Step 3

Description

Starbrite Premium Golden Teak Oil is the finest sealer/preserver/finish for marine teak and other fine woods. Starbrite uses premium natural oils that are ultra-refined and chemically modified to form high molecular weight polymers that withstand long-term exposure to salt water and harsh weather. Special high-technology additives are blended in to protect the wood from the sun’s damaging UV rays. The result is the ultimate treatment for maximum protection and beauty of teak surfaces. Ideal for use on all fine woods and wood furniture.

Features

  • Extra long lasting protection for teak.
  • Gives teak a natural warm golden color.
  • Easy to use, fast drying.
  • Contains ultraviolet absorbers to resist weathering.
  • Lasts 4 to 6 times longer than standard teak oils.
  • Advanced tung oil polymer formula.
  • Sealer/Preserver/Finish for Marine Teak
  • Also ideal for use on teak furniture and other fine woods
  • Ultra-refined oil, polymers and UV inhibitors provide long-lasting protection and beauty
  • Enhances the natural wood grain and color of teak
  • Brings out the natural beauty of all fine woods
  • Delivers a professional-grade finish, even by first-time users
  • Penetrates deep into teak and contains UV inhibitors to protect against Sun’s drying effects
  • Easy to apply; Dries quickly

Instructions

If wood is dirty and/or weathered, first treat it with Starbrite Premium Teak Cleaner and Starbrite Premium Teak Brightener. Apply to dry teak surfaces using a clean cloth, sponge or brush. Apply by working in the direction of wood grain to maximize penetration of oil into wood. Wait 5 minutes before wiping treated area with a clean cloth to remove excess oil. Apply a second coat only if wood is extremely porous. Reapply Starbrite Premium Golden Teak Oil at the first sign of weathering.

Snappy Teak-Nu Formula No 1

Snappy Teak-Nu Formula No. 1

For That Freshly-Sanded Look

Description

Step 1 of our easy to use two-part teak cleaner and restorer – Must use with Step 2 as the chemical reaction between the two products is what makes teak look brand new.

Features

  • Remove gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
  • No hard scrubbing or bronze wool required
  • Will not soften deck seams
  • Made in the USA

Instructions

Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 to achieve best results.

FOR BADLY SOILED, OILED OR COATED TEAK:
1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use medium bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes after use.

2. Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water. When the treated area is completely dry, the deck will look like it has been freshly sanded.

FOR LIGHTLY SOILED TEAK:
1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use medium or soft bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium or soft bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brush thoroughly after use.

2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use medium to soft bristle brush to spread uniformly over treated area. Use medium to soft bristle brush, scrubbing lightly to attain a uniform light color. Rinse treated area thoroughly.

When the treated area is completely dry, the deck will look like it has been freshly sanded.

HELPFUL SUGGESTIONS
Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.

To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.

Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood.

Snappy Teak-Nu Formula No 2

Snappy Teak-Nu Formula No. 2

For That Freshly-Sanded Look

Description

Step 2 of an easy to use two-part teak cleaner and restorer – Must use with Step 1 as the chemical reaction between the two products is what makes teak look brand new

Features

  • Remove gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
  • No hard scrubbing or bronze wool required
  • Will not soften deck seams
  • Made in the USA

Directions

Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 to achieve best results.

FOR BADLY SOILED, OILED OR COATED TEAK:
1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use medium bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes after use.

2. Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water. When the treated area is completely dry, the deck will look like it has been freshly sanded.

FOR LIGHTLY SOILED TEAK:
1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use medium or soft bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium or soft bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brush thoroughly after use.

2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use medium to soft bristle brush to spread uniformly over treated area. Use medium to soft bristle brush, scrubbing lightly to attain a uniform light color. Rinse treated area thoroughly.

When the treated area is completely dry, the deck will look like it has been freshly sanded.

HELPFUL SUGGESTIONS
Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.

To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.

Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood.

Snappy Teak-Nu Kit

Snappy Teak-Nu Kit

For That Freshly-Sanded Look

Description

An easy to use two-part teak cleaner and restorer kit – Please use both steps 1 & 2 as the chemical reaction between the two products is what leaves teak looking brand new.

Features

  • Remove gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
  • No hard scrubbing or bronze wool required
  • Will not soften deck seams
  • Avoid contact with painted or varnished surfaces
  • Made in the USA
  • Kit contains: 32 oz Formula No. 1 and Formula No. 2 along with 2 scrub brushes to use with each step

Instructions

Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 using bristle brushes included with kit to achieve best results. Rinse brushes thoroughly after every use

FOR BADLY SOILED, OILED OR COATED TEAK:
1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub wood. Avoid contact with painted or varnished surfaces. Rinse brushes after use.

2. Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over the treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water.

FOR LIGHTLY SOILED TEAK:
1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes thoroughly after use.

2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use bristle brush to spread uniformly over treated area. Use soft bristle brush to scrub lightly to attain a uniform light color. Rinse treated area thoroughly.

When the treated area is completely dry, the deck will look like it has been freshly sanded.

HELPFUL SUGGESTIONS
Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.

To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.

Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood.

Premium Teak Brightener - Step 2

Teak Brightener / Restorer – Step 2

Description

Brightens teak and other fine woods. Highlights wood grain and enhances warm natural color. Use as the second step in the restoration of grey weathered teak.

Features

  • Brightens teak and other fine woods.
  • Highlights wood grain and enhances warm natural color.
  • Use as the second step in the restoration of grey weathered teak.
  • Easy to use – just apply and rinse.
  • No rubbing or scrubbing required.

Instructions

If wood is dirty and/or stained, first treat with Starbrite Premium Teak Cleaner. Shake well.

Apply with sponge, cloth or brush in direction of wood grain. Allow to remain on surface for 5 minutes then rinse thoroughly with fresh water. For best results, use when temperature is over 50°F. Use of rubber gloves is recommended. Immediately rinse off spills and drips from surfaces not being treated. To preserve and protect cleaned wood, apply Starbrite Premium Golden Teak Oil or Tropical Teak Oil Sealer.

Premium Teak Cleaner - Step 1

Teak Cleaner – Step 1

Description

Premium Teak Cleaner is the fastest, easiest way to clean teak and other fine woods to prepare them for oiling. It will safely remove old oils and stains without the need for sanding. Cleans without harsh acids or neutralizers. Easy to use, it produces great results on teak and other fine woods.

Features

  • Safe, easy to use formula.
  • Cleans teak and other fine woods.
  • Removes stains and weathering.
  • Use as the first step in the restoration of grey, weathered teak.
  • No need to sand after cleaning.
  • Does not raise wood grain.
  • Cleans teak with no hard rubbing
  • Ideal for use on teak furniture and home decks
  • Will not harm fiberglass or painted surfaces
  • Prepares fine woods for oiling and sealing
  • Contains no dangerous acids

Instructions

Badly weathered (grey or black) teak: Apply Starbrite Premium Teak Cleaner directly to dry wood. Spread cleaner with stiff bristle cleaning brush or a Starbrite Medium Scrub Pad. Allow Starbrite Premium Teak Cleaner to remain on surface for approximately two to three minutes, then scrub in the direction of wood grain to ensure deep cleaning. Rinse thoroughly with fresh water. For stained areas, use Starbrite Magic Scrub to remove even the most stubborn discoloration. Lightly stained teak: Wet wood with fresh water. Apply Starbrite Premium Teak Cleaner and spread with brush or Starbrite Medium Scrub Pad. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After completely cleaning wood, apply Starbrite Premium Teak Brightener to highlight wood grain and enhance natural wood color. To preserve and protect cleaned wood, apply Starbrite Premium Golden Teak Oil or Tropical Teak Oil Sealer.
NOTE: Immediately rinse spills and drips from surfaces not to be treated. Avoid contact with fabrics.

Teak Sealer - Clear

Teak Sealer – Clear

Clear Formula

Description

Starbrite® Teak Sealer lasts longer than traditional sealers. Its UV-inhibitors prevent weathering, fading, and provide more overall protection. Advanced polymers help repel moisture and preserve color on teak and other fine woods.

Features

  • Provides More Protection, Lasts Longer Than Traditional Oils
  • Contains UV Inhibitors to Help Prevent Weathering and Fading
  • For Use on Teak and Other Fine Woods
  • Advanced Polymers Help Repel Moisture and Preserve Color

Instructions

PREPARE SURFACE:
Always start with a clean surface. For graying or dirty wood, clean thoroughly with Starbrite Teak Cleaner. If sanding teak, you must clean the surface before sealing, making sure to remove any loose wax or pitch. Follow with Starbrite Teak Brightener—it not only enhances the grain and patina of the teak, but also opens the pores of the wood, allowing Teak Sealer to penetrate more evenly and provides maximum adhesion and performance. If any stains, black streaks, or dirt marks still remain, use Starbrite Teak Scrub while teak is wet to remove all discolorations. Allow teak to dry completely before applying sealer.

Mix sealer by shaking or stirring. Once open, use a mixing stick to stir any solids on the bottom of the container into solution. Apply product with a foam brush in the direction of the wood grain, using short, even brush strokes to obtain a uniform finish. Continue application across entire surface, ending strokes at natural break points, such as a seams. Once complete, apply a second coat to ensure an even, clear finish.

TIPS & TRICKS:
Brush marks or uneven spots? Easily corrected by rubbing with a clean, dry towel in the direction of the wood grain before sealer dries. Clean any spills or drips immediately with mineral spirits and a clean rag. Sunlight/UV-exposure will speed drying time.

NEXT STEPS & MAINTENANCE:
Clean wear and tear from heavy traffic areas with Starbrite Boat Wash or diluted Starbrite Teak Cleaner, and allow to dry. Touch up scuffed or scratched spots by applying Teak Sealer. Blend into surrounding area with a clean, dry cloth. Touched-up area will blend in with other treated teak upon drying. Starbrite Teak Sealer will slowly fade as it ages, instead of turning black. At that time, follow these direction completely to refinish surface. If for any reason sealer needs to be removed safely, quickly and efficiently, use Starbrite Gel Formula Teak Cleaner/Restorer.