Furniture Cleaner
Formulated for Outdoor Furniture
Description
Starbrite® Outdoor Collection Furniture Cleaner can be used on poly, resin, vinyl, plastic, rubber, glass, metal and fiberglass surfaces. Cleaner can be sprayed directly onto surface to be cleaned, then use a sponge, cloth, or soft brush to spread evenly. Allow 30 seconds before lightly brushing and rinsing or wiping clean. Stubborn stains may require a repeat application that is allowed to soak in for about a minute, followed by light scrubbing or wiping clean.
Features
- Safe, yet powerful formula loosens and dissolves greasy, grimy messes
- Formulated for use on poly, resin, vinyl, plastic, rubber, glass, metal and fiber glass surfaces
- Biodegradable formula
RV Wash
Description
Starbrite® Premium RV Wash is specifically formulated to remove road grime, grease, bug deposits, dust or mud from all exterior areas of an RV. Unlike dishwashing detergents that can strip polish or wax, Starbrite® Premium RV Wash has the power to loosen and remove tough dirt without removing protective coatings.
Features
- Concentrated formula is tough on dirt yet economical to use; a few capfuls cleans a full-size RV
- Specifically formulated to remove road grime, bug debris, dust, mud and more
- Safe for all RV exterior surfaces
- Will not remove wax or polish; will not harm decals
- Non-toxic, phosphate-free, biodegradable formula
Instructions
For best results, use when surface to be cleaned is cool to the touch. Add about an ounce of Star brite® Premium RV Wash to a bucket of water, mixing well. Apply using a cloth, soft brush or sponge, then rinse well. To keep your RV looking its best, apply a protective coating of Star brite® Premium RV Polish with PTEF® at the beginning of each season. Use Star brite® Premium RV Guard Speed Detailer & Protectant with PTEF® after each washing or as often as needed to enhance the shine and extend the life of the polish, or to spot clean light road grime, bug deposits or bird droppings.
Furniture Protectant
Formulated for Outdoor Furniture
Description
Starbrite® Outdoor Collection Furniture Protectant is formulated with PTEF®, a protective polymer, barrier coating that can be used on poly, resin, vinyl, plastic, rubber, glass, metal and fiberglass surfaces. This coating adds UV protection to prevent fading and cracking as well as enhance the appearance of all outdoor furniture surfaces. Spray product onto surface to be treated, or to avoid overspray, spray onto a soft cloth and apply to surface. Spread evenly in a circular, overlapping motion to ensure uniform coverage and wipe up excess. Use as often as needed to enhance appearance and remove light dust, dirt, salt spray, or grime.
Features
- Enhances appearance of all outdoor furniture surfaces while removing light grime
- UV inhibitors help prevent fading and cracking
- Ideal for use on poly, resin, vinyl, plastic, rubber, glass, metal and fiberglass surfaces
RV Wash & Wax
Description
Starbrite® Premium RV Wash & Wax is specifically formulated to clean and shine in one step, saving time and money. It removes road grime, grease, bug deposits, dust and mud from all exterior areas of an RV while adding a deep shine. Contains UV inhibitors to help protect against fading. Unlike dishwashing detergents that can strip polish or wax, Starbrite® Premium RV Wash & Wax has the power to loosen and remove tough dirt without removing protective coatings. Starbrite® Premium RV Wash & Wax extends the life of the wax or polish on your RV.
Features
- Cleans and enhances shine in one step
- Concentrated formula is tough on dirt yet economical to use; a few capfuls cleans a full-size RV
- Specifically formulated to remove road grime, bug debris, dust, mud and more
- PTEF® polymers enhance shine and add UV protection to help prevent fading; Will not remove wax or polish or harm decals
- Safe for all exterior RV surfaces; Non-toxic, biodegradable formula
Instructions
For best results, use when surface to be cleaned is cool to the touch. Add about an ounce of Starbrite® Premium RV Wash & Wax to a bucket of water, mixing well. Apply using a cloth, soft brush or sponge, then rinse well. Use a towel, chamois or blower to dry the washed area and reveal the shine. To keep your RV looking its best, apply a protective coating of Starbrite® Premium RV Polish with PTEF® at the beginning of each season. Use Starbrite® Premium RV Guard Speed Detailer & Protectant with PTEF® after each washing or as often as needed to enhance the shine and extend the life of the polish, or to spot clean light road grime, bug deposits or bird droppings.
Heavy Duty Fabric Cleaner
Formulated for Indoor & Outdoor Fabrics
Description
Starbrite® Outdoor Collection Heavy Duty Fabric Cleaner is formulated to safely clean and maintain the appearance of both indoor and outdoor furniture fabrics. For spot cleaning, spray directly onto stain and allow 30 seconds. Use a cloth, sponge or soft brush to gently rub area. Rinse thoroughly with water or wipe clean. To clean large areas spray evenly over entire section to be cleaned and allow to penetrate for 30 seconds to 1 minute. Using a cloth, sponge or soft brush, gently rub area to lift dirt before rinsing entire area thoroughly or wiping clean.
Features
- Safe for all outdoor fabrics including polyester, canvas, and all acrylic fabrics
- PTEF polymers help repel future stains and UV rays that can cause fading
- For best results follow up with Outdoor Collection Fabric Protectant with PTEF
Premium RV One Step Cleaner Wax
Description
Starbrite®’s new line of RECREATIONAL VEHICLE CARE products is engineered to clean, maintain, protect and enhance the appearance and value of RVs and travel trailers. All of these Premium RV products are formulated utilizing the company’s 45 years of experience creating products designed for the saltwater marine environment, the toughest conditions any fiberglass, paint or metal surfaces can face. As with all Starbrite products, they are easy to use, provide professional grade results and are a great value.
READ ALL INCLUDED INSTRUCTIONS COMPLETELY BEFORE USE
Features
- Restores color and shine to fiberglass and painted surfaces
- Contains UV inhibitors to help prevent fading
- Ideal for removing light scuff marks
- Can be applied by hand or with a buffer
Instructions
Shake well before use. Using a dry, soft cotton or microfiber cloth, apply product evenly in a circular, overlapping motion to ensure uniform coverage, working in small sections of about 18” by 18” at a time. RV One Step Cleaner Wax works while wet, so apply more as needed. Rub well to remove light oxidation, hazing, chalking or scuff marks. Severely oxidized sections may require a repeated application with more vigorous rubbing. RV Cleaner Wax will quickly dry to a haze; rub off using a soft, clean cotton or microfiber cloth. Once the surface is restored, seal and protect it with a coating of Starbrite Premium RV Polish.
Premium RV Polish
Description
Starbrite® Premium RV Polish with PTEF® is specifically formulated to add full season protection against dirt and grime while also helping to block UV rays that cause fading. It delivers an easy-to-apply, high-gloss, long-lasting shine to all fiberglass, painted surfaces and polished metals.
Features
- PTEF® Polymers Help Repel Stains & Damaging UV Rays for All-Season Protection
- Easy to apply by hand or with a buffer on fiberglass, painted surfaces and polished metals
- Polymers bond to treated surface to help repel dirt, grime and greasy stains to make cleanup fast and easy; can be applied over old wax or polish
- UV inhibitors guard against fading and chalking
- Delivers superior, longer-lasting results compared to other polishes or waxes
Instructions
Start by washing surface to be treated with Starbrite® Premium RV Wash or RV Wash & Wax and allow to dry. Shake bottle before using and then apply a quarter-sized amount to a clean, soft cloth. Apply to surface in a circular, overlapping motion to ensure complete coverage, working in areas about 18” by 18” at a time. Polish works while wet, so reapply to cloth as needed. For best results, do not apply in direct sunlight or when temperature is below 50°F. Starbrite® Premium RV Polish with PTEF® will quickly dry to a haze. Buff lightly with a soft, clean cloth or microfiber to reveal a deep, durable shine. Dirt, droppings, grime and grease will not stick to treated surfaces. Use Starbrite® Premium RV Guard Speed Detailer & Protectant with PTEF® periodically to extend the life of polish and to enhance the shine, plus as needed to spot clean light grime, bug deposits or bird droppings.
Water Repellent Fabric Protectant
Formulated for Indoor & Outdoor Fabrics
Description
Starbrite® Outdoor Collection Fabric Protectant is formulated with PTEF®, a protective polymer, barrier coating to restore water repellency to all outdoor fabrics. If surface to be treated is dirty or stained, clean with Outdoor Collection Heavy Duty Fabric Cleaner. Once fabric has dried, apply Water Repellent with sprayer, brush, or sponge spreading evenly to thoroughly wet top surface taking care to avoid overspray, or dripping onto surfaces not being treated. Let dry for 6 hours before using.
Features
- PTEF® polymers help repel UV rays that cause fading
- Helps prevent mildew stains
- Does not change feel or breathability of fabric
- For dirty or stained fabric use Outdoor Collection Heavy Duty Fabric Cleaner
Mildew Stain Remover
Removes Tough Mildew Stains on Contact
Description
Starbrite® Outdoor Collection Mildew Stain Remover begins removing tough mildew stains on contact. Spray or wipe directly onto surface to be treated, wait for stain to disappear and then rinse thoroughly with fresh water. One application will remove most mildew stains; stubborn stains may require a second application and light scrubbing. Ideal for use on outdoor furniture, outdoor fabrics, and vinyl umbrella’s.
Features
- Buffered formula is tough on stains but won’t harm stitching
- Begins removing stains on contact
- Formulated for plastic. poly, resin, and fiberglass outdoor furniture
RV Guard Speed Detailer Spray
Description
Starbrite® Premium RV Guard Speed Detailer & Protectant uses high-tech PTEF® polymers that bond to painted surfaces, polished metal and fiberglass to add shine, enhance color and provide a barrier to UV damage. Safe for use on painted surfaces, chrome, stainless steel, aluminum, rubber, fiberglass and plastic surfaces.
Features
- Spray on & wipe to add shine and remove bugs, water spots, road grime and more
- UV inhibitors help prevent fading
- Formulated to add shine and protection to all fiberglass, painted and polished metal surfaces
- Extends time between full polishing or waxing
- Safe for all clearcoats, paints, wraps and decals
Instructions
For best results, apply to surfaces that are cool to the touch. Spray onto surface to be cleaned and wipe using a soft cloth, rubbing lightly as needed on any deposits. Wipe up excess. Use as often as needed. For maximum protection of fiberglass, polished metal and painted surfaces, apply Starbrite® Premium RV Polish with PTEF® annually.
Teak Cleaner & Brightener 500ml
Clean and Brightens Teak in One Step
Description
Starbrite® Outdoor Collection Teak Cleaner and Brightener is designed to restore badly weathered (gray or black) teak. Apply this product directly to dry wood and spread cleaner with a stiff bristle allowing to remain on surface for approximately 2 – 3 minutes. Then scrub in the direction of wood grain to ensure cleaning, and rinse thoroughly with water.
Features
- Cleans and brightens teak in one step
- Cleans without heavy scrubbing
- To preserve and protect teak, apply Outdoor Collection Premium Teak Oil
Premium Teak Oil 500ml
For Use On All Teak & Fine Woods
Description
Starbrite® Outdoor Collection Premium Teak Oil is the finest sealer/preserver/finish for protecting teak from sun and weather. Apply to dry teak surfaces using a clean cloth, sponge or brush. Follow direction of wood grain during application to maximize penetration of oil into wood. Wait 5 minutes, then wipe a clean cloth over treated surfaces to remove excess oil. Apply a second coat if wood is extremely porous.
Features
- Penetrates deep into teak for the ultimate protection from sun and weather
- For all fine woods
- Dries quickly
- For weathered teak, use The Outdoor Collection Teak Cleaner & Brightener Step 1
Instant Action BBQ Cleaner
Removes Grease & Grime From Grills
Description
Starbrite® Outdoor Collection Instant Action BBQ Cleaner can be sprayed onto surfaces inside the cover and left on for 10 to 30 minutes depending on the condition of the surfaces. Scrub surfaces with a clean a stiff brush, an abrasive sponge, or stainless steel wool. Wipe with a clean cloth and rinse thoroughly with water. This product is not recommended for use on painted surfaces, plastic, chrome, brushed or polished aluminum, copper, fabric or tiles.
Features
- Formulated to clean cooking surfaces and most external parts of outdoor grills
- Safe for cast iron, stainless steel, porcelain, ceramic, and glass surfaces
- Can be used on hot surfaces
- Not for use on painted surfaces or polished metals
Liquid Electrical Tape – LET 4oz-Black
Description
Liquid Electrical Tape (LET) is easy to use, providing an airtight, waterproof, dielectric coating in minutes. The coating will last for the life of the application, yet it can be removed immediately as needed. One application will protect terminal connections or splices, as well as guard against vibrations that can loosen connections. Star brite Liquid Tape is UL-tested, easy to use and reliable.
Features
- Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
- Prevents corrosion on wires and terminals, protects against vibration.
- Easy to use, cap has a brush applicator.
- Patented, UL-tested, fast drying formula.
- Can be built-up with additional layers.
- Adheres to all metal, plastic, vinyl, rubber and composite surfaces
- Stops terminal screws from loosening due to vibration
- UL® tests available upon request
- 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
- Can be applied to irregular shaped and hard to reach connections
- Multicolors allow coding of wires
- Will not peel or unravel
- Stays clean and neat
- Service range -50°F to +275°F
- Great flexibility
- Super dielectric strength
Instructions
Stir well before using. Wires or terminal to be sealed must be clean and dry. Brush or dip Star brite” Liquid Electrical Tape on electrical connection area. Allow to dry for 5 minutes and apply second coat if greater thickness of seal is needed. Succeeding coats may be applied at 5 minute intervals to build up extremely thick protection. Product fully cures in 24 hours.
Salt Off Concentrate Kit with Applicator
Description
Salt Off® safely removes salt deposits from virtually all marine surfaces and fishing or dive gear. It is also the ideal way to flush and remove salt deposits from engines. The biodegradable formula contains no harsh solvents or caustic acids. It leaves a protective, non-slippery polymer coating to repel future salt deposits.
Features
- The most effective way to remove salt deposits from fishing tackle, dive gear, railings and decks
- Removes salt deposits from fiberglass decks, vinyl, painted surfaces, aluminum, chrome, stainless steel, magnesium, plastic, wood, glass and rubber
- Use Salt Off® applicator to flush engine to remove salt deposits from outboard and inboard engines
- This is a complete kit with applicator
- Will not remove wax or polish; won’t cause streaks
- Items can be completely immersed
Instructions
To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.
To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.
To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.
NOTE: Do not store Salt Off® in applicator when not in use.
Liquid Electrical Tape – LET 4oz-Red
Description
Liquid Electrical Tape (LET) is easy to use, providing an airtight, waterproof, dielectric coating in minutes. The coating will last for the life of the application, yet it can be removed immediately as needed. One application will protect terminal connections or splices, as well as guard against vibrations that can loosen connections. Star brite Liquid Tape is UL-tested, easy to use and reliable.
Features
- Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
- Prevents corrosion on wires and terminals, protects against vibration.
- Easy to use, cap has a brush applicator.
- Patented, UL-tested, fast drying formula.
- Can be built-up with additional layers.
- Adheres to all metal, plastic, vinyl, rubber and composite surfaces
- Stops terminal screws from loosening due to vibration
- UL® tests available upon request
- 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
- Can be applied to irregular shaped and hard to reach connections
- Multicolors allow coding of wires
- Will not peel or unravel
- Stays clean and neat
- Service range -50°F to +275°F
- Great flexibility
- Super dielectric strength
Instructions
Stir well before using. Wires or terminal to be sealed must be clean and dry. Brush or dip Star brite” Liquid Electrical Tape on electrical connection area. Allow to dry for 5 minutes and apply second coat if greater thickness of seal is needed. Succeeding coats may be applied at 5 minute intervals to build up extremely thick protection. Product fully cures in 24 hours.
Salt Off Applicator
Description
Starbrite’s Salt Off® Applicator makes it easy and convenient to apply Salt Off®. The Applicator works with a garden hose and either an engine flusher unit or a spray nozzle.
Starbrite’s Salt Off® is a biodegradable product that quickly and effectively removes salt deposits. It leaves behind a protective polymer coating to help guard against future salt deposits helping to prevent corrosion damage. It can be used to remove salt deposits from fiberglass, metal, vinyl, plastic and painted surfaces, as well as on fishing and dive gear. Use as a motor flush in I/O and outboard engines.
Features
- Automatically mixes and dispenses Salt Off®
- Attaches to “ear muffs” to flush boat engine cooling systems with Salt Off®
- Attaches to a garden hose to apply Salt Off® to trailers, boat decks, railings and all other marine surfaces, as well as to fishing gear, dive equipment, motorcycles, cars, trucks and all other metal surfaces
- On/Off Switch to control flow of water or Salt Off® to surface being treated
Instructions
To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.
To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off’s polymer coating will protect the engine against future rust and corrosion.
NOTE: Do not store Salt Off® in applicator when not in use.
Liquid Electrical Tape LET 1 FL OZ TUBE Black
Description
Liquid Electrical Tape (LET) is easy to use, providing an airtight, waterproof, dielectric coating in minutes. The coating will last for the life of the application, yet it can be removed immediately as needed. One application will protect terminal connections or splices, as well as guard against vibrations that can loosen connections. Star brite Liquid Tape is UL-tested, easy to use and reliable.
Features
- Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
- Prevents corrosion on wires and terminals, protects against vibration.
- Easy to use, cap has a brush applicator.
- Patented, UL-tested, fast drying formula.
- Can be built-up with additional layers.
- Adheres to all metal, plastic, vinyl, rubber and composite surfaces
- Stops terminal screws from loosening due to vibration
- UL® tests available upon request
- 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
- Can be applied to irregular shaped and hard to reach connections
- Multicolors allow coding of wires
- Will not peel or unravel
- Stays clean and neat
- Service range -50°F to +275°F
- Great flexibility
- Super dielectric strength
Instructions
Stir well before using. Wires or terminal to be sealed must be clean and dry. Brush or dip Star brite” Liquid Electrical Tape on electrical connection area. Allow to dry for 5 minutes and apply second coat if greater thickness of seal is needed. Succeeding coats may be applied at 5 minute intervals to build up extremely thick protection. Product fully cures in 24 hours.
Salt Off with PTEF
Description
Salt Off® Concentrate is specifically formulated to quickly and effectively remove salt deposits from metal, fiberglass, plastic or painted surfaces. It contains special polymers that bond to the treated surface to help prevent the formation of future deposits. Depending on the application, Salt Off® can be sprayed directly onto the surface to be treated and then rinsed with fresh water, or simply left in place.
The formula is safe for use on all boats, vehicles, trailers, marine parts, engines, fishing and dive gear and more. It will not etch, stain or otherwise damage metal or plastic surfaces. It is ideal for removing salt water deposits from boats and fishing gear, as well as for protecting cars or trailers from the damage caused by exposure to road salt.
Salt Off® is also very effective at protecting marine engines used in salt water; when used with the Salt Off® Applicator, it will flush deposits from the engine’s cooling system to help insure maximum performance and service life. The Applicator can also be used to more easily apply Salt Off® to large areas.
Salt Off® is available in convenient, Ready to Use, 22 ounce spray bottles as well as in concentrated form, in 32 ounce and 1-gallon containers.
Features
- Removes salt deposits from all marine surfaces
- Use as a motor flush in I/O and outboard engines
- Rinses away salt buildup on hulls, decks, rails, towers, trailers, diving equipment, rods, reels and more
Instructions
To remove salt deposits from exterior marine surfaces, trailers, dive gear, fishing rods & reels: Fill dispenser cup from the Salt Off® applicator (94100) with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a trigger-type watering nozzle. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Mixture” position. Thoroughly saturate all surfaces that need to be treated, allowing Salt Off® to soak in for 5 to 10 minutes. Stubborn deposits may require light brushing. Rinse with fresh water and allow treated surfaces to air dry.
To treat items by immersing: Add 2 to 4 fl. oz. of Salt Off® Concentrate per 1 gallon of fresh water. Immerse item to be treated for several minutes, rinse with fresh water and allow to air dry.
To flush inboard and outboard engines: Fill Dispenser Cup with Salt Off® Concentrate. Attach one end of applicator to a garden hose and the other end to a flushing unit designed for your engine type. Ensure black knob on the applicator is in the “On” position and the blue knob is in the “Water Only” position. Run the engine to reach normal operating temperature. Once operating temperature has been reached, turn off the engine and turn the blue knob to “mixture” and verify the solution is flowing. Restart the engine and allow the engine to run until dispenser cup is clear, and the product has been used up. Salt Off®’s coating will protect the engine against future rust and corrosion.
NOTE: Do not store Salt Off® in applicator when not in use.
Liquid Electrical Tape – LET 1 FL OZ TUBE Red
Description
Liquid Electrical Tape (LET) is easy to use, providing an airtight, waterproof, dielectric coating in minutes. The coating will last for the life of the application, yet it can be removed immediately as needed. One application will protect terminal connections or splices, as well as guard against vibrations that can loosen connections. Star brite Liquid Tape is UL-tested, easy to use and reliable.
Features
- Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
- Prevents corrosion on wires and terminals, protects against vibration.
- Easy to use, cap has a brush applicator.
- Patented, UL-tested, fast drying formula.
- Can be built-up with additional layers.
- Adheres to all metal, plastic, vinyl, rubber and composite surfaces
- Stops terminal screws from loosening due to vibration
- UL® tests available upon request
- 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
- Can be applied to irregular shaped and hard to reach connections
- Multicolors allow coding of wires
- Will not peel or unravel
- Stays clean and neat
- Service range -50°F to +275°F
- Great flexibility
- Super dielectric strength
Instructions
Stir well before using. Wires or terminal to be sealed must be clean and dry. Brush or dip Star brite” Liquid Electrical Tape on electrical connection area. Allow to dry for 5 minutes and apply second coat if greater thickness of seal is needed. Succeeding coats may be applied at 5 minute intervals to build up extremely thick protection. Product fully cures in 24 hours.
2 Stroke Super Premium Plus TC-W3
Description
Super Premium TC-W3 combines an extremely high-grade synthetic-blend base stock with a custom additive package. The result is the best synthetic-blend TC-W3 oil available that equals or exceeds all OEM oils. It will not void engine warranties, meets or exceeds all engine manufacturer specifications and provides first-rate performance and protection at an affordable price. Super Premium TC-W3 contains a higher concentration of the additives found in Premium TC-W3. It is ideal for use in high-performance engines, including FICHT, E-TEC, Optimax and HPDI outboards. It is ideal for use in all 2-cycle engines, to include personal watercraft, pre-mix and direct-injection designs.
Features
- Exceeds performance specifications for E-Tec, FICHT, Optimax and HPDI engines.
- Engineered for operation under extreme conditions rated #Best Performance Oil
- Contains PIB viscosity modifier to greatly improve lubricity and to reduce smoking.
- High-detergent formula removes deposits from fuel delivery system.
- Synthetic blend ashless formula minimizes piston ring sticking and protects against pre-ignition problems.
- Environmentally friendly, reduces emissions.
Aqua Water System Conditioner
Description
AQUA Water System Conditioner coats tank walls and pipes to prevent bad taste or smell. Eliminates plastic tank taste, odors and discoloration from stored water. To maintain water quality, use AQUA Water Treatment & Freshener every time you fill the tank.
Features
- Non-toxic
- Keeps water tasting and smelling fresh for up to 1 year
- Prevents water from picking up taste or smell from water lines or tank
Instructions
One level teaspoon treats 100 gallons of water. Dissolve desired amount of Aqua Water Conditioner in small amount of warm water. Add this mixture to water to be treated. Do not exceed recommended dosage. Use as often as needed. To clean and deodorize fresh water tanks that have developed foul smells or taste after long periods of storage, use AQUA Water Tank & System Flush.
Bilge Cleaner
Description
Disperses and loosens sludge and grime in the bilge so it can be pumped out. Leaves bilge clean and odor-free.
Features
- Biodegradable.
- Easy to use; just pour in, run boat, pump out.
- Dissolves and eliminates oil, grease, fuel, scum and sludge.
- Will not harm fiberglass, rubber hoses, wiring, metal or plastic.
Directions
Pour entire contents of bottle into bilge. Use one bottle for every 25′ of boat length. If bilge is dry, add several gallons of water. Allow Bilge Cleaner to remain in bilge while running boat for a minimum of one hour. After running boat, drain or pump out bilge in accordance with local regulations. Repeat once a month or as often as necessary to keep bilge clean and free of odors.
Chrome & Stainless Steel Polish
Description
Chrome & Stainless Polish helps keep both new and older boat metals looking their best by quickly and easily removing grit, grime and grease from metal surfaces. After a light buffing the formula leaves a protective barrier on metal surfaces to help prevent future pitting, salt deposits, and discoloration from rust and corrosion.
Features
- Cleans and shines all chrome and stainless steel surfaces in one easy step.
- Protects against pitting, discoloration, staining and/or rusting.
- Easy to use. Wipe on, wipe off formula.
- Resists salt and water spray.
- Bonds to metal for long lasting protection.
- Also good for copper, tin and brass.
- Leaves a dazzling shine.
- Quickly removes surface corrosion
- Provides a barrier to future stains and corrosion
- Removes dirt, grime, salt deposits, surface rust
- No hard buffing needed to clean surface
Instructions
Shake bottle well before using. Metal should be dry before polishing. Apply to a clean, dry cloth and rub on metal to remove surface rust, dirt and grime. Reapply to cloth as needed; product works while moist. Star brite Chrome & Stainless Polish will quickly dry to a haze. Using a clean, dry cloth, wipe off haze to reveal polished surface. For best results, apply a second coat within 10 to 30 days. Two applications will provide a tough, durable shield against rust, surface corrosion, grease, grime and dirt.
Starbrite Chrome & Stainless Polish – Outlasts any other polish
- Cleans and shines chrome and stainless steel surfaces
- Protects against pitting, discoloration, staining and rusting
- Easy to use. wipe on, wipe off formula
- Oil based – resists salt and water spray
- Bonds to metal for long lasting protection
- Leaves a dazzling shine
No Damp Dehumidifier Bucket
Description
No Damp Dehumidifier is the effortless way to help control the excessive humidity that leads to musty odors, stains or corrosion aboard stored boats, RVs or seasonal homes. The special pellets automatically remove moisture from the air, depositing it safely in the convenient container. Great for cabins, heads, closets, and other enclosed spaces.
Features
- Designed to help prevent musty odors in stored boats, RVs or seasonal homes.
- Absorbs airborne moisture to help prevent mildew smells.
- Eliminates mildew odor and other musty odors.
- Protects boats in storage, vacation homes, basements and other enclosed areas.
- 12 ounce size is ideal for protecting boat cabins, closets, small rooms or safes.
- 36 ounce size is perfect for salons, engine rooms, campers, basements, garages or other large areas.
Standard Extending Handle 3′ – 6′ with 8″ Standard Brush
Description
High Quality Marine Grade handle constructed of aircraft grade, triple anodized aluminum to provide years of maintenance free use.
Features
- Telescoping shafts feature two non-slip hand grips with positive twist lock to provide extension from 3’ (91 cm) to 6’ (183 cm)
- Stainless steel push button quick connect/disconnect allows for instant attachment of all Extend-A-Brush accessories
- Designed to float if dropped overboard
- 7/8″ outer diameter with 3/4″ insert
Instructions
Teak Cleaner – Step 1
Description
Premium Teak Cleaner is the fastest, easiest way to clean teak and other fine woods to prepare them for oiling. It will safely remove old oils and stains without the need for sanding. Cleans without harsh acids or neutralizers. Easy to use, it produces great results on teak and other fine woods.
Features
- Safe, easy to use formula.
- Cleans teak and other fine woods.
- Removes stains and weathering.
- Use as the first step in the restoration of grey, weathered teak.
- No need to sand after cleaning.
- Does not raise wood grain.
- Cleans teak with no hard rubbing
- Ideal for use on teak furniture and home decks
- Will not harm fiberglass or painted surfaces
- Prepares fine woods for oiling and sealing
- Contains no dangerous acids
Instructions
Badly weathered (grey or black) teak: Apply Starbrite Premium Teak Cleaner directly to dry wood. Spread cleaner with stiff bristle cleaning brush or a Starbrite Medium Scrub Pad. Allow Starbrite Premium Teak Cleaner to remain on surface for approximately two to three minutes, then scrub in the direction of wood grain to ensure deep cleaning. Rinse thoroughly with fresh water. For stained areas, use Starbrite Magic Scrub to remove even the most stubborn discoloration. Lightly stained teak: Wet wood with fresh water. Apply Starbrite Premium Teak Cleaner and spread with brush or Starbrite Medium Scrub Pad. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After completely cleaning wood, apply Starbrite Premium Teak Brightener to highlight wood grain and enhance natural wood color. To preserve and protect cleaned wood, apply Starbrite Premium Golden Teak Oil or Tropical Teak Oil Sealer.
NOTE: Immediately rinse spills and drips from surfaces not to be treated. Avoid contact with fabrics.
1 Gallon Engine Descaling Motor Flush
Description
Starbrite® Descaling Engine Flush is designed to safely and quickly remove scale, calcium deposits, corrosion, salt and carbon buildup in your engine’s cooling and wet exhaust systems. These deposits can make your engine run hot by restricting water flow through the cooling jackets. Calcium buildup also may damage your engine’s water pump. Descaling Engine Flush WILL NOT damage seals, gaskets or rubber impellers.
Features
- Removes scale and deposits from all marine engines
- Will not damage engine seals, gaskets or rubber impellers.
Instructions
READ ALL INSTRUCTIONS AND CAUTIONS COMPLETELY BEFORE USING. WE STRONGLY RECOMMEND THE USE OF STARbrite®’S DO IT YOURSELF MARINE ENGINE DESCALING KIT.
With Starbrite® Do It Yourself Marine Engine Descaling Kit #35001
1. Starbrite®’s Marine Engine Descaling Kit comes with a 5 gallon tank, gate valve/cap and clear hose. You will need ear muffs or flushing attachment for your type of engine and a garden hose.
2. Check marine engine manual for specific coolant capacity and plan accordingly. Mix one part of concentrated Starbrite® Descaling Engine Flush with one part fresh water in the 5 gallon tank, making sure vent cap is open. Once 5 gallon tank is filled with mixture, tighten gate valve/cap and lay tank on side with gate valve facing down.
3. Using marine engine flushing attachment (not included in kit) and garden hose, start engine and allow it to reach normal operating temperature to ensure that the thermostat is open to allow Descaling Engine Flush to circulate throughout entire cooling system.
4. When engine reaches normal operating temperature and thermostat opens, turn off engine and disconnect garden hose from flushing attachment. Attach one end of clear hose to engine flushing attachment and open gate valve to allow Engine Descaling Flush to flow into clear hose.
5. Start engine and leave run at idle speed until the green mixture comes out of the exhaust/water outlet of your engine. Immediately shut off the engine and close gate valve on tank. Let engine sit for 5-10 minutes.
6. Open gate valve and turn engine on to allow more flushing mixture to flow through system. After 1-2 minutes, close gate valve and shut engine off. Disconnect clear hose from flushing attachment and connect garden hose. Turn on water supply and start engine. Run engine at idle for 5 minutes, allowing fresh water to run throughout system.
7. Turn off engine and remove flushing attachment. Rinse down outside of engine. Dispose of flushing mixture in compliance with local, state and federal laws.
Without Starbrite® Do It Yourself Marine Engine Descaling Kit
1. Remove boat from water. Place the motor in an appropriate container so that the engine intake is well below the lip of the container. Mix one part of concentrated Starbrite® Descaling Engine Flush with one part fresh water. Fill container until engine intake is completely submerged in the Descaling Engine Flush mixture.
2. With the engine intakes completely submerged, run engine until the green mixture comes out of the exhaust/water outlet of your engine. Immediately shut off the engine and let engine sit for 5-10 minutes. Turn engine on to allow fresh mixture to flow through system, then shut off engine again. Drain entire system.
3. Dispose of flush mixture in compliance with local, state and federal laws. Fill container with fresh water and completely submerge engine intakes in water. Start engine once more and run for 5 minutes while fresh water runs throughout the engine system.
CAUTION: Wear goggles, respirator mask and gloves when handling this acid based product. Avoid breathing fumes when mixing water and engine flush. It is normal for this product to slightly smoke when initially mixed with water. Take precautions against spills near any grass and plants. KEEP AWAY FROM PETS AND CHILDREN. DO NOT MIX WITH OTHER CHEMICALS. THIS PRODUCT IS BIODEGRADABLE.
WARNING: Contains inhibited and enhanced Hydrochloric Acid. Use in well ventilated area. Harmful if swallowed. If swallowed, drink 3-4 glasses of milk, milk-of-magnesia or water. DO NOT induce vomiting. Call a physician immediately. If contact with eyes occurs, flush eyes continuously with fresh water for 15 minutes. Get medical attention if irritation continues. This is a professional strength product, call our toll free number 1 (800) 327-8583 if you have any questions regarding safety or use. Starbrite® liability is limited to the purchase price of this product.
Results
-
- Before
-
- After
Instafresh Holding Tank Treatment – Fresh Pine Scent
Tank Deodorizing Formula
Description
Starbrite® Instant Fresh Toilet Treatment controls holding tank odors and gassing. It also keeps holding tank walls and drain lines free from debris while lubricants prevent drain valves from sticking. Ideal for all RV, marine, and portable toilets. The formaldehyde-free formula can be pumped out at any dumping station.
Features
- Lubricates drain valves
- Breaks down waste & tissue
- Formaldehyde-Free
- Fresh Pine Scent
Instructions
HOLDING TANK SYSTEMS:
Black Water: Use 1 fl. Oz. For each 5 gallons of tank capacity. Pour through toilet into holding tank and add 1 gallon of water. Hot weather and long retention times may require additional treatment. Grey Water: Use 1 fl. Oz. For each 10 gallons of tank capacity. Pour through shower or sink drain and add 1 gallon of water.
RECIRCULATION TOILETS:
Pour 8 fl. Oz. Into initial water charge. PORTABLE TOILETS: Pour 4 fl. Oz. Into waste holding tank with enough fresh water to cover tank bottom.
8 oz: Treats up to 40 Gallons
32 oz: Treats up to 160 Gallons
No Damp Dehumidifier Refill
Description
No Damp Dehumidifier is the effortless way to help control the excessive humidity that leads to musty odors, stains or corrosion aboard stored boats, RVs or seasonal homes. The special pellets automatically remove moisture from the air, depositing it safely in the convenient container. Great for cabins, heads, closets, and other enclosed spaces.
Features
- Refills all No Damp® Dehumidifiers.
- Add right on top of remaining chemical.
- Very economical to use.
Power Pine Bilge Cleaner
Description
Pine extract formula emulsifies oil, grease, fuel and transmission fluid.
Features
- Concentrated formula makes 96 gallons (32 fl. Oz. size) or 384 gallons (1 gallon size).
- Works in fresh or salt water.
- Environmentally safe, biodegradable.
- Leaves bilge smelling clean and fresh.
Instructions
Use one 1 fl. oz to every 3 gallons of water. Allow mixture to remain in bilge for at least one hour while running boat as normal. The boat’s motion provides the “scrubbing” action. Pump out or drain afterwards. Use a higher concentration of Power Pine Bilge Cleaner if bilge is extremely dirty. Use once a month or as often as necessary to remove grime, dirt and odor.
Premium Marine Polish with PTEF
Description
Premium Marine Polish is simply the best polish you can buy. The special polymer coating provides unmatched protection against UV rays, seal the surface to repel stains and deliver a deep, long-lasting gloss. Application is simple, whether by hand or with a buffer; apply, let dry to a haze and wipe off. Use once per year to keep new and restored boats looking their best. Ideal for all fiberglass, metal, glass or painted surfaces. Note: if surface is oxidized or hazy, use One Step Heavy Duty Cleaner Wax.
Features
- The ultimate protection for fiberglass, metal & painted surfaces.
- UV inhibitors help stop fading and oxidation.
- For medium to heavy oxidation, use Premium Cleaner Wax.
- Maximum UV Protection & Shine.
- Increases Hull Speed.
- Specially formulated for use on fiberglass, metal, plexiglass and painted surfaces and can be applied over old wax or polish.
- Lasts up to 4 to 5 times longer than other marine waxes.
Directions
Before polishing, wash surface to remove grit and dirt (we recommend Star brite Boat Wash or Star brite Sea Safe Biodegradable Boat Wash). Shake bottle well. Apply evenly with a clean cloth to a small area in a circular motion while polish is wet. Star brite Premium Marine Polish will quickly dry to a haze. Wipe off haze using another clean, dry cloth. For best results, apply a second coat within 30 days. Two applications will provide exceptional protection against fading, chalking, rust, corrosion and general degradation. Oil, dirt and salt will not stick to the super slick surface and can usually be washed off with boat wash and water. NOTE: If surface to be treated is faded, chalking or oxidized, first use Star brite Premium Cleaner Wax to restore the finish.”