The Outdoor Collection Furniture Cleaner

Furniture Cleaner

Formulated for Outdoor Furniture

Description

Starbrite® Outdoor Collection Furniture Cleaner can be used on poly, resin, vinyl, plastic, rubber, glass, metal and fiberglass surfaces. Cleaner can be sprayed directly onto surface to be cleaned, then use a sponge, cloth, or soft brush to spread evenly. Allow 30 seconds before lightly brushing and rinsing or wiping clean. Stubborn stains may require a repeat application that is allowed to soak in for about a minute, followed by light scrubbing or wiping clean.

Features

  • Safe, yet powerful formula loosens and dissolves greasy, grimy messes
  • Formulated for use on poly, resin, vinyl, plastic, rubber, glass, metal and fiber glass surfaces
  • Biodegradable formula
The Outdoor Collection Furniture Protectant

Furniture Protectant

Formulated for Outdoor Furniture

Description

Starbrite® Outdoor Collection Furniture Protectant is formulated with PTEF®, a protective polymer, barrier coating that can be used on poly, resin, vinyl, plastic, rubber, glass, metal and fiberglass surfaces. This coating adds UV protection to prevent fading and cracking as well as enhance the appearance of all outdoor furniture surfaces. Spray product onto surface to be treated, or to avoid overspray, spray onto a soft cloth and apply to surface. Spread evenly in a circular, overlapping motion to ensure uniform coverage and wipe up excess. Use as often as needed to enhance appearance and remove light dust, dirt, salt spray, or grime.

Features

  • Enhances appearance of all outdoor furniture surfaces while removing light grime
  • UV inhibitors help prevent fading and cracking
  • Ideal for use on poly, resin, vinyl, plastic, rubber, glass, metal and fiberglass surfaces
The Outdoor Collection Heavy Duty Fabric Cleaner

Heavy Duty Fabric Cleaner

Formulated for Indoor & Outdoor Fabrics

Description

Starbrite® Outdoor Collection Heavy Duty Fabric Cleaner is formulated to safely clean and maintain the appearance of both indoor and outdoor furniture fabrics. For spot cleaning, spray directly onto stain and allow 30 seconds. Use a cloth, sponge or soft brush to gently rub area. Rinse thoroughly with water or wipe clean. To clean large areas spray evenly over entire section to be cleaned and allow to penetrate for 30 seconds to 1 minute. Using a cloth, sponge or soft brush, gently rub area to lift dirt before rinsing entire area thoroughly or wiping clean.

Features

  • Safe for all outdoor fabrics including polyester, canvas, and all acrylic fabrics
  • PTEF polymers help repel future stains and UV rays that can cause fading
  • For best results follow up with Outdoor Collection Fabric Protectant with PTEF
The Outdoor Collection Water Repellent Fabric Protectant

Water Repellent Fabric Protectant

Formulated for Indoor & Outdoor Fabrics

Description

Starbrite® Outdoor Collection Fabric Protectant is formulated with PTEF®, a protective polymer, barrier coating to restore water repellency to all outdoor fabrics. If surface to be treated is dirty or stained, clean with Outdoor Collection Heavy Duty Fabric Cleaner. Once fabric has dried, apply Water Repellent with sprayer, brush, or sponge spreading evenly to thoroughly wet top surface taking care to avoid overspray, or dripping onto surfaces not being treated. Let dry for 6 hours before using.

Features

  • PTEF® polymers help repel UV rays that cause fading
  • Helps prevent mildew stains
  • Does not change feel or breathability of fabric
  • For dirty or stained fabric use Outdoor Collection Heavy Duty Fabric Cleaner
The Outdoor Collection Mildew Stain Remover

Mildew Stain Remover

Removes Tough Mildew Stains on Contact

Description

Starbrite® Outdoor Collection Mildew Stain Remover begins removing tough mildew stains on contact. Spray or wipe directly onto surface to be treated, wait for stain to disappear and then rinse thoroughly with fresh water. One application will remove most mildew stains; stubborn stains may require a second application and light scrubbing. Ideal for use on outdoor furniture, outdoor fabrics, and vinyl umbrella’s.

Features

  • Buffered formula is tough on stains but won’t harm stitching
  • Begins removing stains on contact
  • Formulated for plastic. poly, resin, and fiberglass outdoor furniture
The Outdoor Collection Teak Cleaner & Brightener

Teak Cleaner & Brightener 500ml

Clean and Brightens Teak in One Step

Description

Starbrite® Outdoor Collection Teak Cleaner and Brightener is designed to restore badly weathered (gray or black) teak. Apply this product directly to dry wood and spread cleaner with a stiff bristle allowing to remain on surface for approximately 2 – 3 minutes. Then scrub in the direction of wood grain to ensure cleaning, and rinse thoroughly with water.

Features

  • Cleans and brightens teak in one step
  • Cleans without heavy scrubbing
  • To preserve and protect teak, apply Outdoor Collection Premium Teak Oil
The Outdoor Collection Premium Teak Oil

Premium Teak Oil 500ml

For Use On All Teak & Fine Woods

Description

Starbrite® Outdoor Collection Premium Teak Oil is the finest sealer/preserver/finish for protecting teak from sun and weather. Apply to dry teak surfaces using a clean cloth, sponge or brush. Follow direction of wood grain during application to maximize penetration of oil into wood. Wait 5 minutes, then wipe a clean cloth over treated surfaces to remove excess oil. Apply a second coat if wood is extremely porous.

Features

  • Penetrates deep into teak for the ultimate protection from sun and weather
  • For all fine woods
  • Dries quickly
  • For weathered teak, use The Outdoor Collection Teak Cleaner & Brightener Step 1
The Outdoor Collection Instant Action BBQ Cleaner

Instant Action BBQ Cleaner

Removes Grease & Grime From Grills

Description

Starbrite® Outdoor Collection Instant Action BBQ Cleaner can be sprayed onto surfaces inside the cover and left on for 10 to 30 minutes depending on the condition of the surfaces. Scrub surfaces with a clean a stiff brush, an abrasive sponge, or stainless steel wool. Wipe with a clean cloth and rinse thoroughly with water. This product is not recommended for use on painted surfaces, plastic, chrome, brushed or polished aluminum, copper, fabric or tiles.

Features

  • Formulated to clean cooking surfaces and most external parts of outdoor grills
  • Safe for cast iron, stainless steel, porcelain, ceramic, and glass surfaces
  • Can be used on hot surfaces
  • Not for use on painted surfaces or polished metals
Liquid-Electrical-Tape-LET-4-FL-OZ-CAN-Black

Liquid Electrical Tape – LET 4oz-Black

Description

Liquid Electrical Tape (LET) is easy to use, providing an airtight, waterproof, dielectric coating in minutes. The coating will last for the life of the application, yet it can be removed immediately as needed. One application will protect terminal connections or splices, as well as guard against vibrations that can loosen connections. Star brite Liquid Tape is UL-tested, easy to use and reliable.

Features

  • Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
  • Prevents corrosion on wires and terminals, protects against vibration.
  • Easy to use, cap has a brush applicator.
  • Patented, UL-tested, fast drying formula.
  • Can be built-up with additional layers.
  • Adheres to all metal, plastic, vinyl, rubber and composite surfaces
  • Stops terminal screws from loosening due to vibration
  • UL® tests available upon request
  • 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
  • Can be applied to irregular shaped and hard to reach connections
  • Multicolors allow coding of wires
  • Will not peel or unravel
  • Stays clean and neat
  • Service range -50°F to +275°F
  • Great flexibility
  • Super dielectric strength

Instructions

Stir well before using. Wires or terminal to be sealed must be clean and dry. Brush or dip Star brite” Liquid Electrical Tape on electrical connection area. Allow to dry for 5 minutes and apply second coat if greater thickness of seal is needed. Succeeding coats may be applied at 5 minute intervals to build up extremely thick protection. Product fully cures in 24 hours.

Liquid Electrical Tape - LET 4 FL OZ CAN Black

Liquid Electrical Tape – LET 4oz-Red

Description

Liquid Electrical Tape (LET) is easy to use, providing an airtight, waterproof, dielectric coating in minutes. The coating will last for the life of the application, yet it can be removed immediately as needed. One application will protect terminal connections or splices, as well as guard against vibrations that can loosen connections. Star brite Liquid Tape is UL-tested, easy to use and reliable.

Features

  • Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
  • Prevents corrosion on wires and terminals, protects against vibration.
  • Easy to use, cap has a brush applicator.
  • Patented, UL-tested, fast drying formula.
  • Can be built-up with additional layers.
  • Adheres to all metal, plastic, vinyl, rubber and composite surfaces
  • Stops terminal screws from loosening due to vibration
  • UL® tests available upon request
  • 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
  • Can be applied to irregular shaped and hard to reach connections
  • Multicolors allow coding of wires
  • Will not peel or unravel
  • Stays clean and neat
  • Service range -50°F to +275°F
  • Great flexibility
  • Super dielectric strength

Instructions

Stir well before using. Wires or terminal to be sealed must be clean and dry. Brush or dip Star brite” Liquid Electrical Tape on electrical connection area. Allow to dry for 5 minutes and apply second coat if greater thickness of seal is needed. Succeeding coats may be applied at 5 minute intervals to build up extremely thick protection. Product fully cures in 24 hours.

Liquid-Electrical-Tape-LET-1oz-Black

Liquid Electrical Tape LET 1 FL OZ TUBE Black

Description

Liquid Electrical Tape (LET) is easy to use, providing an airtight, waterproof, dielectric coating in minutes. The coating will last for the life of the application, yet it can be removed immediately as needed. One application will protect terminal connections or splices, as well as guard against vibrations that can loosen connections. Star brite Liquid Tape is UL-tested, easy to use and reliable.

Features

  • Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
  • Prevents corrosion on wires and terminals, protects against vibration.
  • Easy to use, cap has a brush applicator.
  • Patented, UL-tested, fast drying formula.
  • Can be built-up with additional layers.
  • Adheres to all metal, plastic, vinyl, rubber and composite surfaces
  • Stops terminal screws from loosening due to vibration
  • UL® tests available upon request
  • 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
  • Can be applied to irregular shaped and hard to reach connections
  • Multicolors allow coding of wires
  • Will not peel or unravel
  • Stays clean and neat
  • Service range -50°F to +275°F
  • Great flexibility
  • Super dielectric strength

Instructions

Stir well before using. Wires or terminal to be sealed must be clean and dry. Brush or dip Star brite” Liquid Electrical Tape on electrical connection area. Allow to dry for 5 minutes and apply second coat if greater thickness of seal is needed. Succeeding coats may be applied at 5 minute intervals to build up extremely thick protection. Product fully cures in 24 hours.

Liquid-Electrical-Tape-LET-1oz-Red

Liquid Electrical Tape – LET 1 FL OZ TUBE Red

Description

Liquid Electrical Tape (LET) is easy to use, providing an airtight, waterproof, dielectric coating in minutes. The coating will last for the life of the application, yet it can be removed immediately as needed. One application will protect terminal connections or splices, as well as guard against vibrations that can loosen connections. Star brite Liquid Tape is UL-tested, easy to use and reliable.

Features

  • Forms an airtight, protective, waterproof, UV resistant, dielectric coating.
  • Prevents corrosion on wires and terminals, protects against vibration.
  • Easy to use, cap has a brush applicator.
  • Patented, UL-tested, fast drying formula.
  • Can be built-up with additional layers.
  • Adheres to all metal, plastic, vinyl, rubber and composite surfaces
  • Stops terminal screws from loosening due to vibration
  • UL® tests available upon request
  • 100’s of uses – bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor lighting fixtures, instruments, anywhere a weatherproof and dependable connection is needed.
  • Can be applied to irregular shaped and hard to reach connections
  • Multicolors allow coding of wires
  • Will not peel or unravel
  • Stays clean and neat
  • Service range -50°F to +275°F
  • Great flexibility
  • Super dielectric strength

Instructions

Stir well before using. Wires or terminal to be sealed must be clean and dry. Brush or dip Star brite” Liquid Electrical Tape on electrical connection area. Allow to dry for 5 minutes and apply second coat if greater thickness of seal is needed. Succeeding coats may be applied at 5 minute intervals to build up extremely thick protection. Product fully cures in 24 hours.

Premium Teak Cleaner - Step 1

Teak Cleaner – Step 1

Description

Premium Teak Cleaner is the fastest, easiest way to clean teak and other fine woods to prepare them for oiling. It will safely remove old oils and stains without the need for sanding. Cleans without harsh acids or neutralizers. Easy to use, it produces great results on teak and other fine woods.

Features

  • Safe, easy to use formula.
  • Cleans teak and other fine woods.
  • Removes stains and weathering.
  • Use as the first step in the restoration of grey, weathered teak.
  • No need to sand after cleaning.
  • Does not raise wood grain.
  • Cleans teak with no hard rubbing
  • Ideal for use on teak furniture and home decks
  • Will not harm fiberglass or painted surfaces
  • Prepares fine woods for oiling and sealing
  • Contains no dangerous acids

Instructions

Badly weathered (grey or black) teak: Apply Starbrite Premium Teak Cleaner directly to dry wood. Spread cleaner with stiff bristle cleaning brush or a Starbrite Medium Scrub Pad. Allow Starbrite Premium Teak Cleaner to remain on surface for approximately two to three minutes, then scrub in the direction of wood grain to ensure deep cleaning. Rinse thoroughly with fresh water. For stained areas, use Starbrite Magic Scrub to remove even the most stubborn discoloration. Lightly stained teak: Wet wood with fresh water. Apply Starbrite Premium Teak Cleaner and spread with brush or Starbrite Medium Scrub Pad. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After completely cleaning wood, apply Starbrite Premium Teak Brightener to highlight wood grain and enhance natural wood color. To preserve and protect cleaned wood, apply Starbrite Premium Golden Teak Oil or Tropical Teak Oil Sealer.
NOTE: Immediately rinse spills and drips from surfaces not to be treated. Avoid contact with fabrics.

Premium Teak Brightener - Step 2

Teak Brightener / Restorer – Step 2

Description

Brightens teak and other fine woods. Highlights wood grain and enhances warm natural color. Use as the second step in the restoration of grey weathered teak.

Features

  • Brightens teak and other fine woods.
  • Highlights wood grain and enhances warm natural color.
  • Use as the second step in the restoration of grey weathered teak.
  • Easy to use – just apply and rinse.
  • No rubbing or scrubbing required.

Instructions

If wood is dirty and/or stained, first treat with Starbrite Premium Teak Cleaner. Shake well.

Apply with sponge, cloth or brush in direction of wood grain. Allow to remain on surface for 5 minutes then rinse thoroughly with fresh water. For best results, use when temperature is over 50°F. Use of rubber gloves is recommended. Immediately rinse off spills and drips from surfaces not being treated. To preserve and protect cleaned wood, apply Starbrite Premium Golden Teak Oil or Tropical Teak Oil Sealer.

Premium Golden Teak Oil - Step 3

Premium Teak Oil Preservative / Sealer – Step 3

Description

Starbrite Premium Golden Teak Oil is the finest sealer/preserver/finish for marine teak and other fine woods. Starbrite uses premium natural oils that are ultra-refined and chemically modified to form high molecular weight polymers that withstand long-term exposure to salt water and harsh weather. Special high-technology additives are blended in to protect the wood from the sun’s damaging UV rays. The result is the ultimate treatment for maximum protection and beauty of teak surfaces. Ideal for use on all fine woods and wood furniture.

Features

  • Extra long lasting protection for teak.
  • Gives teak a natural warm golden color.
  • Easy to use, fast drying.
  • Contains ultraviolet absorbers to resist weathering.
  • Lasts 6 times longer than standard teak oils.
  • Advanced tung oil polymer formula.
  • Sealer/Preserver/Finish for Marine Teak
  • Also ideal for use on teak furniture and other fine woods
  • Ultra-refined oil, polymers and UV inhibitors provide long-lasting protection and beauty
  • Enhances the natural wood grain and color of teak
  • Brings out the natural beauty of all fine woods
  • Delivers a professional-grade finish, even by first-time users
  • Penetrates deep into teak and contains UV inhibitors to protect against Sun’s drying effects
  • Easy to apply; Dries quickly

Instructions

If wood is dirty and/or weathered, first treat it with Starbrite Premium Teak Cleaner and Starbrite Premium Teak Brightener. Apply to dry teak surfaces using a clean cloth, sponge or brush. Apply by working in the direction of wood grain to maximize penetration of oil into wood. Wait 5 minutes before wiping treated area with a clean cloth to remove excess oil. Apply a second coat only if wood is extremely porous. Reapply Starbrite Premium Golden Teak Oil at the first sign of weathering.

One Step Teak Cleaner and Brightener

One Step Teak Cleaner & Brightener

Combines Two Steps in One

Description

Starbrite® Teak Cleaner and Brightener is specially formulated to transform old gray and black stained teak in one step.

Features

  • Saves time and effort preparing teak for oiling
  • Cleans teak; removing dirt, grime and old oil
  • Leaves teak ready for oiling
  • Ideal for use on all teak and fine woods
  • Contains no dangerous acids; Phosphate-free, Biodegradable formula

Instructions

For badly weathered, grey or black teak, apply Teak Cleaner & Brightener directly to dry wood. Use a stiff bristle cleaning brush or Starbrite Medium Scrub Pad to spread product evenly. Allow Teak Cleaner & Brightener to remain on surface for approximately two to three minutes before scrubbing. Scrub in the direction of wood grain to ensure deep cleaning before thoroughly rinsing wood with fresh water. Severely dirty or stained wood may require a second application and use of Starbrite Stainless Steel Teak Scrub pad. For lightly weathered teak, wet wood with fresh water, apply Teak Cleaner & Brightener, using a bristle brush or medium scrub pad to spread evenly over surface to be treated. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After cleaning wood, apply Starbrite Premium Golden Teak Oil to enhance natural wood color and preserve and protect the restored wood. Rinse off spills and drips onto surfaces not being treated. Avoid contact with fabrics.

Teak Sealer - Clear

Teak Sealer – Clear

Clear Formula

Description

Starbrite® Teak Sealer lasts longer than traditional sealers. Its UV-inhibitors prevent weathering, fading, and provide more overall protection. Advanced polymers help repel moisture and preserve color on teak and other fine woods.

Features

  • Provides More Protection, Lasts Longer Than Traditional Oils
  • Contains UV Inhibitors to Help Prevent Weathering and Fading
  • For Use on Teak and Other Fine Woods
  • Advanced Polymers Help Repel Moisture and Preserve Color

Instructions

PREPARE SURFACE:
Always start with a clean surface. For graying or dirty wood, clean thoroughly with Starbrite Teak Cleaner. If sanding teak, you must clean the surface before sealing, making sure to remove any loose wax or pitch. Follow with Starbrite Teak Brightener—it not only enhances the grain and patina of the teak, but also opens the pores of the wood, allowing Teak Sealer to penetrate more evenly and provides maximum adhesion and performance. If any stains, black streaks, or dirt marks still remain, use Starbrite Teak Scrub while teak is wet to remove all discolorations. Allow teak to dry completely before applying sealer.

Mix sealer by shaking or stirring. Once open, use a mixing stick to stir any solids on the bottom of the container into solution. Apply product with a foam brush in the direction of the wood grain, using short, even brush strokes to obtain a uniform finish. Continue application across entire surface, ending strokes at natural break points, such as a seams. Once complete, apply a second coat to ensure an even, clear finish.

TIPS & TRICKS:
Brush marks or uneven spots? Easily corrected by rubbing with a clean, dry towel in the direction of the wood grain before sealer dries. Clean any spills or drips immediately with mineral spirits and a clean rag. Sunlight/UV-exposure will speed drying time.

NEXT STEPS & MAINTENANCE:
Clean wear and tear from heavy traffic areas with Starbrite Boat Wash or diluted Starbrite Teak Cleaner, and allow to dry. Touch up scuffed or scratched spots by applying Teak Sealer. Blend into surrounding area with a clean, dry cloth. Touched-up area will blend in with other treated teak upon drying. Starbrite Teak Sealer will slowly fade as it ages, instead of turning black. At that time, follow these direction completely to refinish surface. If for any reason sealer needs to be removed safely, quickly and efficiently, use Starbrite Gel Formula Teak Cleaner/Restorer.

Snappy Teak-Nu Formula No 1

Snappy Teak-Nu Formula No. 1

For That Freshly-Sanded Look

Description

Step 1 of our easy to use two-part teak cleaner and restorer – Must use with Step 2 as the chemical reaction between the two products is what makes teak look brand new.

Features

  • Remove gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
  • No hard scrubbing or bronze wool required
  • Will not soften deck seams
  • Made in the USA

Instructions

Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 to achieve best results.

FOR BADLY SOILED, OILED OR COATED TEAK:
1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use medium bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes after use.

2. Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water. When the treated area is completely dry, the deck will look like it has been freshly sanded.

FOR LIGHTLY SOILED TEAK:
1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use medium or soft bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium or soft bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brush thoroughly after use.

2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use medium to soft bristle brush to spread uniformly over treated area. Use medium to soft bristle brush, scrubbing lightly to attain a uniform light color. Rinse treated area thoroughly.

When the treated area is completely dry, the deck will look like it has been freshly sanded.

HELPFUL SUGGESTIONS
Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.

To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.

Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood.

Snappy Teak-Nu Formula No 2

Snappy Teak-Nu Formula No. 2

For That Freshly-Sanded Look

Description

Step 2 of an easy to use two-part teak cleaner and restorer – Must use with Step 1 as the chemical reaction between the two products is what makes teak look brand new

Features

  • Remove gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
  • No hard scrubbing or bronze wool required
  • Will not soften deck seams
  • Made in the USA

Directions

Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 to achieve best results.

FOR BADLY SOILED, OILED OR COATED TEAK:
1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use medium bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes after use.

2. Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water. When the treated area is completely dry, the deck will look like it has been freshly sanded.

FOR LIGHTLY SOILED TEAK:
1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use medium or soft bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium or soft bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brush thoroughly after use.

2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use medium to soft bristle brush to spread uniformly over treated area. Use medium to soft bristle brush, scrubbing lightly to attain a uniform light color. Rinse treated area thoroughly.

When the treated area is completely dry, the deck will look like it has been freshly sanded.

HELPFUL SUGGESTIONS
Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.

To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.

Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood.

Snappy Teak-Nu Kit

Snappy Teak-Nu Kit

For That Freshly-Sanded Look

Description

An easy to use two-part teak cleaner and restorer kit – Please use both steps 1 & 2 as the chemical reaction between the two products is what leaves teak looking brand new.

Features

  • Remove gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
  • No hard scrubbing or bronze wool required
  • Will not soften deck seams
  • Avoid contact with painted or varnished surfaces
  • Made in the USA
  • Kit contains: 32 oz Formula No. 1 and Formula No. 2 along with 2 scrub brushes to use with each step

Instructions

Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 using bristle brushes included with kit to achieve best results. Rinse brushes thoroughly after every use

FOR BADLY SOILED, OILED OR COATED TEAK:
1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub wood. Avoid contact with painted or varnished surfaces. Rinse brushes after use.

2. Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over the treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water.

FOR LIGHTLY SOILED TEAK:
1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes thoroughly after use.

2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use bristle brush to spread uniformly over treated area. Use soft bristle brush to scrub lightly to attain a uniform light color. Rinse treated area thoroughly.

When the treated area is completely dry, the deck will look like it has been freshly sanded.

HELPFUL SUGGESTIONS
Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.

To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.

Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood.

Instant Fresh Toilet Treatment Lemon Scent

Instant Fresh Toilet Treatment Lemon Scent

Description

Instant Fresh Toilet Treatment is a simple one-step, highly effective way to deal with the boat’s holding tank that eliminates the need for multiple chemicals. This efficient, biodegradable formula quickly breaks down waste to remove potential odors, while leaving a light, pleasant scent behind. Additionally, special lubricants prevent drain valves from sticking. Also works in portable marine toilets.

Features

  • Non-formaldehyde, non-staining, biodegradable formula.
  • Latest technological lubricants keep drain valves from sticking.
  • Breaks down waste quickly and efficiently.
  • One ounce treats five gallons.
  • Fresh pine scent controls holding tank odors Fresh lemon scent controls holding tank odors
  • Complies with EU criteria for biodegradable products; Contains lubricants that prevent drain valves from sticking
  • 16oz/473ml: Treats up to 606 liters 32oz/946ml Treats up to 1211 liters 1 Gallon/3.79L Treats up to 4844 liters

Directions

Holding Tank Systems: BLACK WATER: Add 30 ml for each 19 liters of tank capacity. Pour through toilet into holding tank and add 4 liters of water. Hot weather and long retention times may require additional treatment. GREY WATER: Use 30 ml for each 38 liters of tank capacity. Pour through shower or sink drain and add 4 liters of water. RECIRCULATION TOILETS: Pour 236 ml into initial water charge. PORTABLE TOILETS: Pour 118 ml into waste holding tank and add water to cover tank bottom.

View Guard Clear Plastic Treatment

View Guard Clear Plastic Treatment

Description

View Guard Clear Plastic Treatment is an industry first: a wet weather visibility enhancer specifically formulated for use on clear plastic enclosures such as Strataglass, EZ2CY and Eisinglass. Specially designed surfactants safely remove dirt and grit while advanced polymers repel rain, spray and salt to provide maximum visibility, even in heavy weather conditions. View Guard  also provides a barrier to damaging UV rays that can cause clear plastic to crack and turn yellow.

Features

  • Repels water to enhance wet weather visibility.
  • Specifically formulated for use on Strataglass, EZ2CY, Eisinglass and other clear plastic surfaces.
  • Repels water, spray, salt & dirt.
  • Gently cleans clear plastic surfaces.
  • Provides protection against damaging UV rays.
  • Cleans and provides UV protection for all clear plastic surfaces.
  • Dramatically Improves Wet Weather Visibility
  • Repels spray and rain to enhance wet weather visibility of clear plastic enclosures
  • Removes grime, salt, spray and dirt

Instructions

Spray on surface to be treated and use clean, soft cloth to apply in a circular motion, working in areas approximately 18″ by 18″ in size. Turn cloth over and wipe completely dry. Do not let dry before wiping. Use as often as needed. For yellowed, hazed or lightly scratched clear plastic enclosures, use Star brite® Clear Plastic Restorer before applying View Guard®.

Mildew Stain Remover

Mildew Stain Remover

Description

Mildew Stain Remover quickly removes unsightly mildew stains from fiberglass, vinyl, plastic or painted surfaces. It begins working on contact. The special buffered formula will not harm vinyl upholstery or threads. It is a much safer alternative to using bleach, and can also be used around the home or in RVs wherever mildew stains are a problem.

Features

  • Removes mildew stains on contact without heavy scrubbing.
  • Simple to use; spray on, scrub lightly and rinse off stains.
  • Safe for use on fiberglass, painted surfaces, rubber, plastic and vinyl headliners, bolsters and upholstery.
  • Special buffered formula will not harm vinyl upholstery or thread.
  • Ideal for home or RV use, too.
  • Does not weaken fabric or thread.
  • Formulated specifically for use on marine upholstery; will not harm vinyl or stitching

Instructions

Just spray or wipe Mildew Stain Remover on boat tops, vinyl cushions, vinyl chairs, vinyl canopies, tile, grout, shower stalls and curtains, mats, awnings, etc. Do not rinse until mildew stain disappears. Stubborn stains may require a second application and light scrubbing. Rinse well after use. Not recommended for use on fabric; test for colorfastness in an inconspicuous area before proceeding with overall cleaning.

Waterproofing - Fabric Waterproofer + Stain Repellent + UV Protection

Waterproofing – Fabric Waterproofer + Stain Repellent + UV Protection

Description

Starbrite Waterproofing restores water repellency to virtually all marine fabrics from boat covers to bimini tops. It is also the easiest, most effective way to waterproof car covers, tents, tarps, foul weather gear, convertible tops and more.

Starbrite Waterproofing is also great for use on new fabrics, greatly extending their service life by providing an additional barrier to moisture and damaging UV rays.

It’s easy to use; simply spray the fabric to be restored, and allow it to dry for 6 hours before use. Always apply Waterproofing outdoors, taking care to not breathe the solution.

Waterproofing is safe for on all marine fabrics, including Sunbrella.

  • 1 Gallon – 465 square Feet of coverage*
  • 22 oz covers – 80 square feet coverage*

* Coverage may vary slightly depending upon amount of product applied per square foot

Fabric Compatibility Check
Star brite Waterproofing is compatible with most quality outdoor fabrics including; nylon, canvas, finished leather, and acrylics including Sunbrella. However, some economy materials like polyester and urethane-backed fabrics are not compatible with most solvents, so please check the material before use. Also note that solvent-based products can affect the adhesive glue used on some carpeting, and can further depreciate heavily sun damaged fabric. Star brite offers a solvent-free formula, ‘SeaSafe Waterproofing’ as an odorless alternative.

Sprayer Notice
Our sprayer is specially designed for waterproofing solvents and may require 10 or more pumps to prime before it will spray. It may take more pumps to get started than standard water-based product sprayers.

Features

  • Waterproofing + UV & stain protection for boat covers, car covers, bimini tops, sail covers, tents, jackets, backpacks, boots, awnings & patio covers
  • Does not change the breathability, color, or feel of fabric
  • Great for use on new fabrics, greatly extending their service life by providing an additional barrier to moisture and damaging UV rays
  • 1 Gallon – 465 square feet of coverage (Coverage may vary slightly depending upon amount of product applied per square foot)
  • 22 oz covers – 80 square feet coverage (* Coverage may vary slightly depending upon amount of product applied per square foot)

Instructions

If surface to be waterproofed is dirty or stained, clean it with Star brite® Sail & Canvas Cleaner. Fabric to be treated must be dry. Apply enough Waterproofing with sprayer, brush or sponge to thoroughly wet top surface. Take care to avoid overspray, drips or penetration onto surfaces not being treated. Allow treated item to dry for 6 hours before using. Do not fold or store treated item until dry. Use only in a well ventilated area.

Results